Liftmaster Backup Battery Replacement

Chamberlain Group is the parent company of Liftmaster. They engineer and design residential garage door openers, commercial door operational and gate entry systems. Liftmaster in particular is the company’s line for garage door openers for professional installation. If you are a proud owner of the Liftmaster Garage Door Opener, taking care of the unit may be an afterthought. Some people don’t even realize that their garage door opener comes with a backup battery until it beeps to indicate that the power is low. The backup battery offers extra power just in case you experience a power outage. This way, you can still use your garage door if you need to leave the house or get back in. It is important to test your unit periodically. While the door opener will beep to let you know the battery is low you cannot be too careful. After all, you are buying the battery in case of a power blackout. You may as well make sure it performs as it should.

How to know if you need to Replace the Backup Battery for your Liftmaster

Having a battery backup will ensure you can access your garage during a power outage. There are few ways to determine if the backup battery has worn down to the point of needing a replacement. The first way to tell, is that there would be an audible tone indicating that the battery has lost its charge over time. The second way is to unplug your Liftmaster from it’s main powersource and test if it is operational. If your garage door opener doesn’t work, then you will need to replace your backup battery. Third, you can check the battery life indicator gauge on your wall control. To replace the Liftmaster battery, all you need to do is follow a few steps. Before we begin, let’s make sure you purchase the right one. Always refer to your Liftmaster garage door opener owner’s manual to make sure you are purchasing the right Liftmaster backup battery replacement 485ml.

Chamberlain / LiftMaster / Craftsman 4228 Replacement Battery for Battery Backup

Rated 4.5 out of 5 stars from 1,237 customer reviews Price: $39.90 with Free Shipping. Over 75% of the reviews on Amazon are happy customers. There are a few that state that this seller did not send them the battery as listed. And that they were sent a generic brand instead. Regardless of that, the price is reasonable and works with most garage door openers, including the Chamberlain, Craftsman and Sears brands. If you are looking for a highly trusted seller, we recommend trying one of the next two options below.

Liftmaster 485LM OEM Battery Backup

Rated 4.7 out of 5 stars from customer 118 reviews Price: $31.48 on Amazon Prime. Most customers received recently manufactured batteries and report easy installation. A small handful complained that they received an expired battery. All in all, this is a genuine Liftmaster battery backup replacement. Just make sure you received a fresh one. Older batteries won’t last as long.

ExpertPower EXP1250 12V 5Ah

Rated 4.5 out of 5 stars – 1,968 customer reviews.

Price: $17.49 on Amazon Prime The ExpertPower Battery brand is the most trusted and highest reviewed sealed lead acid batteries on Amazon. Offering the best for your Liftmaster at a backup battery price. and will keep your garage door opener working in a power outage. Customers are raving on Amazon about how easy this backup battery was to install and the care in the packaging to protect the terminals from damage during shipment. With the care ExpertPower provides, they offer the Liftmaster with battery backup at the right price.

How to Replace the Liftmaster backup battery

1. Disconnect power to opener.

2. Using a Phillips head screwdriver, remove the battery cover on the motor unit. This is usually underneath the light cover.  Consider removing the light bulb to avoid any accidental breakage.

3. Slide the old battery out to the point where you can remove the connector wires from the terminals. Remove the battery and set aside for proper disposal with a certified battery recycling facility.

4. Partially insert new battery into motor unit with terminals facing out. 

5. Connect red (+) and black (-) wires from motor unit to corresponding terminals on battery. 

6. Replace the battery cover with the holding screw.

7. Reconnect power. You won’t have to worry about that annoying beep or getting caught in a power outage any time soon now.

WordPress management provided by