Anker portable charger how to charge

Portable chargers are a great way for those on the go to ensure that their devices remain charged at all times. One popular manufacturer of portable chargers is Anker. They offer several models with different capacities so that you can buy the charger that best suits your needs. In order to use your Anker portable charger, you must first charge it. In this article, we will explain the procedure for charging your Anker charger, along with some of the problems that you may encounter.

Charging Your Anker Portable Charger

In order to charge your Anker portable charger, you will need the accompanying MicroUSB cable and a power source. It is best to charge your portable charger using a wall outlet, rather than a laptop or other power source. Connect the small end of the MicroUSB cable to your Anker portable charger via the MicroUSB port, and plug the larger USB end into your power source. If you are using a wall outlet, you will need an adapter to do this. 

Once your portable charger is connected with a power source, you will notice four blinking LED lights on the side of your device. These lights will indicate the charging status of your Anker portable charger. For example, 

  • One blinking light: 0%-25% charged
  • Two blinking lights: 25%-50% charged
  • Three blinking lights: 50% to 75% charged
  • Four blinking lights: 75%-100% charged

When your Anker portable charger is fully charged, the lights will turn off. It typically takes 6-7 hours to fully charge your Anker portable charger, depending on the power source you use. Once the four LED lights turn off, you can disconnect your portable charger from the power source. Store your MicroUSB charging cable in a safe place free of debris.

By paying attention to the LED lights on your device, you can make sure that your Anker portable charger is fully charged before you disconnect it. Try not to let your portable charger die, as this will shorten the battery’s lifespan, especially if repeated.


In most cases, charging your Anker portable charger will be a smooth and easy process. Rarely, you will find that your portable charger is not charging, despite the fact that it is plugged into a power source. There are a number of reasons for this, including:

  • A faulty charging cable. Make sure that you are using a high quality, undamaged MicroUSB charging cable, preferably the one that came with your Anker portable charger. 
  • Your charging cable is not fully connected to your Anker portable charger. Make sure that this connection is snug, otherwise your device will not charge.
  • Your charging cable is not fully connected to the power source. Make sure that this connection is snug.
  • There is debris in your portable charger’s MicroUSB charging port. Check for and remove all dirt, lint, or other debris from the MicroUSB port.
  • There is debris in the USB port of your power source. Again, check for and remove all debris, then try charging again. 
  • There is a problem with your Anker portable charger. .Anker portable chargers are known for their durability. Nevertheless, if your device has been dropped, gotten wet, overheated, it could have sustained damage that may prevent it from charging. There is also the possibility that your portable charger is defective. In this case, you should call Anker in order to discuss your options. Your device may be covered by a warranty. If your device is not covered by a warranty, consider taking it to an electronics repair professional. Do not attempt to fix your portable charger by yourself.

Once you have resolved the problem, connect your Anker portable charger to a power source. You will know that your portable charger is functioning properly when the LED lights turn on and your portable charger delivers a charge to another device, such as a cell phone or laptop. While your Anker portable charger is charging another device, you can use the four LED lights to determine how much power it has left. 

If you find yourself needing to keep your cell phone or laptop charged no matter where you are, an Anker portable charger can be a great option. This device is durable and easy to operate. By following the steps outlined in this article, you can ensure that your Anker portable charger is always charged and ready for use.

WordPress management provided by